Parts List:
| Switch Lever Stud Assembly (Shipped with all switch lever orders.) |  |
 |
| Bronze Switch Lever For Right Hand 5'-6" Radius Switch |
#675 |
|
| Bronze Switch Lever For Left Hand 5'-6" Radius Switch |
#675 |
|
| Bronze Switch Lever For 2-Way 5'-6" Radius Switch (2 required) |
#1596 |
|
| Bronze Switch Lever For 3-Way 5'-6" Radius Switch (2 required) |
#1131 |
#1132 |
| Bronze Switch Lever For Right Hand 6'-0" Radius Switch |
#1710-R |
|
| Bronze Switch Lever For Left Hand 6'-0" Radius Switch |
#1710-L |
|
| Bronze Switch Lever For 2-Way 6'-0" Radius Switch (2 required) |
#1409-1 |
|
| Bronze Switch Lever For 3-Way 6'-0" Radius Switch (2 required) |
#1732 |
#1733 |
| Turn Table Pin Assembly |  |
|
| Turn Table Handle Assembly - Cast Iron |  |
|
|
Ball Bearing Set (108 Balls Per Set) For both Cast Iron and Low Profile Turntables. |
 |
|
|
7" Wheel Assembly Consisting of: 1-7" Whell & 2-1/2" Dual Sealed Bearings |
#CT-7 |
 |
|
5" Wheel Assembly Consisting of: 1-5" Whell & 2-1/2" Dual Sealed Bearings |
#CT-5 |
 |
|
4" Wheel Assembly (Low Profile System) Consisting of: 1-4" High Strength Steel Wheels & 2-1" Dual Sealed Bearings. |
#CT-4 |
 |
|
1" Axle Assembly (For Low Profile Dolly) Consisting of: 1-1" Machined Low Profile Dolly Axle, 2 - Washers & 2- Retaining Ring Cups |
 |
 |
| 1½" Bearings (Used for all Cast Iron Dollies and both Cast Iron and Low Profile Transfer Tables) |  |
|
| 1" Bearings (Used for Low Profile Dollies only) |  |
|
|
"R" Dolly Lock Assy Consisting of: 1-Lock Pin, 1-Spring, 1-Cotter Pin & 1-Retaining washing |
 |
|
| Transfer Table Lock Pin Assembly (used for both Cast Iron and Low Profile Transfer Tables.) |
#1592 |
|
| Transfer Table Lock Pin Housing (used for both Cast Iron and Low Profile Transfer Tables) |
#704 |
 |
| Transfer Table Stop (Cast Iron Transfer Pit only) |
#705 |
|
| Transfer Table Stop (Low Profile Transfer Pit only) |  |
|
| HI Boy |
Cast Iron
|
Low Profile
Special Order
|
| Pit Rail (Ordered To Length) |  |
 |
Notes:
Older style dollies and transfer tables using obsolete needle type bearings should and can be easily converted to the new dual sealed bearings.
Used dollies can be shipped back to the factory to be remanufactured back to orginal factory specifications. Used transfer tables can also be shipped back to the factory to be remanufactured back to orginal factory specifications, provided that the rail support structure is not bent.
Downloads | Parts | Contact Us
© 2005 Capital Track Co.
